| Customization: | Available |
|---|---|
| Type: | Ball Mill |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mining Ore Lead Manganese Iron Slag Sliver Aluminum Zinc Cement Powder Grinding Wet Gold Copper Ball Mill
Ball mill is a grinding machine that grinds crushed materials into extremely fine powder. This series of ball mills are mainly used in mining, gold, copper, lead, manganese, iron, slag, silver, aluminum, limestone, gypsum powder and other industrial and mining enterprises, metallurgy, building materials, chemicals and other grindable materials. It can be used for dry and wet grinding, open circuit grinding, and also for circulating grinding with power feeder. The machine has the advantages of reasonable design, strong adaptability to raw materials, fast running speed, high crushing ratio, large output and convenient operation.
| Model | rotate speed(r/min) | feeding size (mm) | dischaege size (mm) | capacity (t/h) | power (kw) | weight (t) |
| Ø900*1800 | 36-38 | <=20 | 0.075-0.89 | 0.65-2 | 18.5 | 4.6 |
| Ø900*3000 | 36 | <=20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
| Ø1200*2400 | 36 | <=25 | 0.074-0.4 | 1.5-4.8 | 30 | 12 |
| Ø1200*3000 | 36 | <=25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
| Ø1200*4500 | 32.4 | <=25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
| Ø1500*3000 | 29.7 | <=25 | 0.074-0.4 | 2~5 | 75 | 15.6 |
| Ø1500*4500 | 27 | <=25 | 0.074-0.4 | 3~6 | 110 | 21 |
| Ø1500*5700 | 28 | <=25 | 0.074-0.4 | 3.5~6 | 130 | 24.7 |
| Ø1830*3000 | 25.4 | <=25 | 0.074-0.4 | 4~10 | 130 | 28 |
| Ø1830*4500 | 25.4 | <=25 | 0.074-0.4 | 4.5~12 | 155 | 32 |
| Ø1830*6400 | 24.1 | <=25 | 0.074-0.4 | 6.5~15 | 210 | 34 |
| Ø1830*7000 | 24.1 | <=25 | 0.074-0.4 | 7.5~17 | 245 | 36 |
| Ø2100*3000 | 23.7 | <=25 | 0.074-0.4 | 6.5~36 | 155 | 34 |
| Ø2100*4500 | 23.7 | <=25 | 0.074-0.4 | 8~43 | 245 | 42 |
| Ø2100*7000 | 23.7 | <=25 | 0.074-0.4 | 8~43 | 280 | 50 |
| Ø2200*4500 | 21.5 | <=25 | 0.074-0.4 | 9~45 | 280 | 48.5 |
| Ø2200*6500 | 21.7 | <=25 | 0.074-0.4 | 12~26 | 380 | 52.8 |
| Ø2200*7000 | 21.7 | <=25 | 0.074-0.4 | 15~28 | 380 | 54 |
| Ø2200*7500 | 21.7 | <=25 | 0.074-0.4 | 15~30 | 380 | 56 |
| Ø2400*3000 | 21 | <=25 | 0.074-0.4 | 7~50 | 245 | 54 |
| Ø2400*4500 | 21 | <=25 | 0.074-0.4 | 8.5~60 | 320 | 65 |
| Ø2700*4000 | 20.7 | <=25 | 0.074-0.4 | 12~80 | 400 | 94 |
| Ø2700*4500 | 20.7 | <=25 | 0.074-0.4 | 12~90 | 430 | 102 |
| Ø3200*4500 | 18 | <=25 | 0.074-0.4 | 0 | 800 | 137 |
1. Large gear ring, large side cover, and large bearing. The gear hub is large, which can extend its service life, and the high-frequency quenching heat treatment process is used to temper the surface; the sprocket adopts high-frequency quenching heat treatment process to temper the surface.
2. Energy saving: ball bearings are used instead of sliding bearings, which greatly reduces friction, makes starting easier, and saves 10-15% energy consumption compared with the old ball mill.
3. Large processing capacity: Due to the use of the discharge plate and grate plate of the standard mill, the processing capacity is increased by more than 20% compared with the energy-saving conical ball mill.
4. The mud surface at the discharge port is low, and the mud can pass quickly, which can reduce the over-grinding of the ore.
5. There are many balls, both large and small balls can be loaded, and small balls will not be discharged, which can also form good working conditions.
6. The equipment is equipped with a support frame, which is convenient for customers to install in the factory area.
7. The electronic control system adopts protection measures such as motor overcurrent, power failure, and three-way power supply imbalance to achieve "worry-free" operation of the ball mill.
){kind=link}