| Customization: | Available |
|---|---|
| Type: | Tailings Processing |
| Voltage: | Can Be Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
In the modern mining production process, tailings are an inevitable by-product, usually the useless part left after the useful metals or minerals are extracted from the ore. If these tailings are not properly handled, they will not only occupy a large amount of land, but also cause environmental pollution and even harm the ecosystem. Therefore, the use of tailings treatment equipment is particularly important. The purpose of tailings treatment equipment is to effectively treat tailings, reduce their negative impact on the environment, and recover useful resources in them.
Our tailings re-processing line applies to re-processing of various metal or non-metal tailings, including iron, gold, lead-zinc, copper, fluorite, wolfram, phosphate, graphite, bauxite, etc.
Re-processing line for different ore tailings:
Iron Tailings: The iron tailings discharge from iron ore plant is in large amount, fine size and different types, and complex property, so we use the process of magnetic separation, flotation, acid leaching and flocculation to recover iron.
Gold Tailings: we usually use all-slime cyanide process and carbon-in-pulp process to recover the gold from gold tailings. As for the gold tailings cyaniding, we will apply the method of dry-tailing stacking. That is, though the process of classifying and dewatering, at the same recycling the water recourses to remove the cyanide in it. Moreover, we will use magnetic separation and gravity separation to remove the iron.
Lead-zinc Tailings: The main component of the lead-zinc tailings are quartz and suicide sericite. Except the methods of stockpiling in tailings pool, dry-tailing stacking and mine filling, Ourwill also apply gravity separation, flotation separation, magnetic separation, gravity - flotation separation, and other process to recycle the valuable elements.
Copper Tailings: If the copper with high heavy metals content, the separation will be easier and apply the process of flotation. If there exist magnetite in the copper tailings, it will firstly using acid leaching to precipitate the copper, then use magnetic separation accordingly.
Fluorite Ore Tailings: we use the process of flotation to reselect the fluorite, roughing and then cleaning. Before roughing, the pulp and the reagent will be fully stirred. After that repeated cleaning will be proceed.
Wolfram Tailings: we will apply gravity separation, magnetic separation and flotation separation to recycle the wolfram. The gravity separation is commonly used. Wolfram tailing re-selection process is mainly used spiral chute and centrifugal ore separator to roughing, shaking table and flotation to cleaning.
Phosphate Tailings: Siliceous collophanite mainly include quartz siliceous minerals in gangue mineral, so the floatability of gangue is larger than valuable mineral.
Graphite Tailings:we will use the process of stage grinding and screening to recover the graphite from tailings. In the process of separation, flotation and shaking table is always used. If we want to achieve comprehensive recovery of several kinds of minerals from graphite tailings, we should combine several separation methods.
Bauxite Tailings: When deal with the bauxite tailings, flotation separation and magnetic separation is the common process. Moreover, wetting, dry-tailing stacking and mine filling is always used.
Main Equipment used in tailings process plant
|
|
|
|
|
){kind=link}